Finance sent over the 2025 R&D expense ledger, totaling 8 million. I scrolled down and saw that 3 million was custom development fees paid to us.
She asked: Can this 8 million be directly used to apply for Nanshan's R&D investment support?
No. You have to subtract 3 million first.
Only the figures after excluding outsourcing are the figures used for reporting.
The Nanshan District Science and Technology Innovation Bureau issued a notice on November 11, opening application channels for two projects at the same time: the OPC Community Support Action, from 17:00 on November 11 to 18:00 on November 25; and the 2026 Science and Technology Enterprise R&D Investment Support Program, from 17:00 on November 11 to 18:00 on December 11. Both are to be submitted on the “Ai Nanshan Enterprise Service Comprehensive Platform.”
The operating procedures for the R&D investment project are very clear: for R&D statistical accounting enterprises that meet the conditions regarding R&D investment expenses and growth rate, based on the previous year's amount after deducting outsourced research and development expenses, the maximum annual grant is 2 million yuan.
Note the two qualifiers. One is “the previous year,” referring to 2025; the other is “deducting commissioned external research and development expenses.”
Outsourced external research and development refers to the money an enterprise pays out when it contracts part of its R&D activities to an external institution. The Odoo custom development, secondary development, and interface development we do for clients fall into this category if the nature of the contract is R&D outsourcing.
So for that 8 million, after deducting 3 million, the base used for declaration is 5 million.
There is another sentence in the procedure that is easy to miss: The R&D expenses and their growth rate mentioned in these operating procedures are all calculated based on data after excluding outsourced external research and development expenses. Both the numerator and denominator must be excluded, not just the numerator.
There is also a threshold: only 2025 R&D expenses of 2 million yuan or more (inclusive) qualify for the tier. 5 million is within the line, but the tier is a notch lower than 8 million.
Here is one more practical distinction. For the same money paid to service providers, if the nature of the contract differs, the treatment also differs: if it is written as an "entrusted development contract," it is outsourced R&D and must be excluded; if it is written as a "technical service contract" or "software implementation service," it should not have been included in R&D expenses in the first place. Some enterprises, in order to inflate the numbers, also stuff implementation fees into the R&D ledger; this practice does not hold up in statistical annual reports and is even more troublesome on the tax side.
Add a type field to contracts in the system to separate commissioned development, technical services, and software procurement. When generating the R&D expense report at month-end, filter by type; this is more reliable than guessing one by one from contract names in Excel after the fact.
The denominator of the growth rate is 2024; if that year is 0, downgrade.
The funding criteria for this project are two dimensions: R&D expenditure scale and R&D expenditure growth rate.
For scale, look at 2025; for growth rate, look at the change from 2024 to 2025. The regulations single out one situation:
“For cases where the 2024 R&D expense data is '0' or there is no data, making it impossible to calculate the R&D expense growth rate, a tiered assessment will be conducted based on the 2025 R&D expenses, and corresponding funding will be provided according to the lower-tier growth rate standard.”
This means that enterprises that did not report R&D expenses in the 2024 R&D statistics can only be granted the lower tier in 2025, no matter how well they perform.
This provision is not very friendly to manufacturing enterprises that are just starting R&D. One of our clients only began setting up an R&D department in 2024; all expenses were recorded under production costs, and the statistical annual report filled in 0. In 2025, it formally established three projects and invested more than 4 million. When applying this year, the growth rate could not be calculated, so it could only go through the low tier.
This isn't something effort can make up for; it's determined by historical data. What can be done is to start this year compiling R&D expenses into the statistical annual report on time; by this time next year, the figures used will be from 2026.
The annual R&D statistics report, the super deduction, and high-tech enterprise status are three sets of figures
There is another condition for the applicant entity: it must have been included in the R&D statistical accounting scope of Nanshan District for 2025, and must still be within the R&D statistical accounting scope as of the application opening date.
This clause shuts many companies out—not because they lack R&D, but because they are not included in the statistical scope.
Last year, a client in industrial cameras showed me three figures from finance: R&D expenses under the tax additional deduction basis were 6.2 million, R&D expenses used for the high-tech enterprise application were 5.8 million, and the figure on the statistical annual report was 1.8 million.
For the same year, three sets of figures, a difference of more than 4 million.
The difference lies in how costs are aggregated. For the additional tax deduction, costs are aggregated by expense category; as long as there is a subsidiary ledger, they can be calculated. The statistical annual report aggregates by project; each project must be initiated, have a project number, and have person-month inputs. They have two ongoing projects that did not go through the project initiation process, so their costs cannot be included in the statistics.
The declaration is based on the number in the statistical annual report. Therefore, project initiation must be done at the beginning of the year, not made up at the end of the year.
By the way, a word about the nature of this project. The regulations state that it is an approval category with post-event subsidies, and funded projects do not require acceptance inspection. It sounds hassle-free, but in fact it puts all the pressure on the paperwork—without an acceptance stage, there is no opportunity to explain things face to face. Whatever the figures look like when submitted, that is how they will be verified. If you report them wrong, you cannot count on on-site communication to make it up.
The same notice also opens another channel that is easy to confuse: the OPC Community Support Action, with a deadline of 18:00 on November 25. For recognized OPC communities, based on the operating entity's investment in the community, each operating entity can receive up to 30 million yuan per year in funding, to provide computing power, data, tools, and order services to OPC innovation entities. The target of this program is community operating entities, not ordinary enterprises. Don't get excited when you see the number 30 million—first check whether you are that entity.
By the way, the tier table in the regulations is a matrix built on two dimensions: R&D expense scale and growth rate. The specific tier amounts are subject to the attached regulations; this article does not reproduce the table. The tier table is very easy to copy the wrong row from during circulation—getting one cell wrong means a deviation of tens of thousands of yuan, so it is better to look directly at the original text.
Three things you can do this week
1. Submit before 18:00 on December 11. First, pull out the R&D statistical annual reports for 2024 and 2025, calculate the figures after excluding outsourcing, see which tier they fall into, and then decide whether to invest effort in preparing the materials.
II. Create a separate project number for outsourced development contracts, separate from self-developed projects. If they are mixed into one R&D project, when excluding them it is impossible to explain clearly which part is outsourced and which part is self-developed, and you get stuck as soon as audit asks.
3. For enterprises that filled in 0 in the 2024 statistical annual report, first estimate based on the tier they can separately qualify for in 2025, and do not budget based on high-growth expectations. At the same time, complete the 2026 project initiation filings—next year will use this year's figures.
